Product introduction
Technical parameter
JN-LM |
||||
Part name |
Unit |
Brand and Specification |
||
Model |
|
4029 |
6029 |
8029 |
Material trademark of bed casting |
|
HT300 |
HT300 |
HT300 |
Mobile structure |
|
Moving beam structure |
Moving beam structure |
Moving beam structure |
X-axis guide rail type and model |
mm |
RGLW65 |
RGLW65 |
RGLW65 |
Y-axis guide rail type and model |
mm |
RGLW65 |
RGLW65 |
RGLW65 |
Z-axis guide rail type and model |
mm |
Square slide pillow |
420X420 Square slide pillow |
420X420 Square slide pillow |
W-axis guide rail type and model |
mm |
RGLW65 |
RGLW65 |
RGLW65 |
X-axis travel |
mm |
4100 |
6100 |
8100 |
Y-axis travel |
mm |
2800 |
2800 |
2800 |
Z-axis travel |
mm |
1000 |
1000 |
1000 |
W-axis travel |
mm |
1200 |
1200 |
1200 |
Working table travel |
mm |
4770X2460X590 |
6770X2500X 590 |
9000X2500X590 |
Working table bearing |
Kg |
20000 |
30000 |
40000 |
Z-axis travel Minimum distance from milling head to workbench |
mm |
100 |
100 |
100 |
Width of trapezoidal grooves of workbench |
mm |
28 |
28 |
28 |
Number of trapezoidal grooves of workbench |
Number |
10 |
10 |
10 |
Spindle model |
|
BT50-200 |
BT50-210 |
BT50-210 |
Spindle speed |
Rpm |
0-4500 |
0-4500 |
0-4500 |
Spindle motor model |
KW/nm |
37;Torque of torque284 |
37;Torque of torque284 |
|
Spindle rotation mode |
|
Gearbox+Direct connection |
||
Spindle rotation ratio |
|
1:3 |
1:3 |
1:3 |
Control cabinet air conditioner |
|
RD-500LF |
RD-500LF |
RD-500LF |
Knife stock capacity |
|
30/40/60 (optional) |
30/40/60 (optional) |
30/40/60 (optional) |
Number of header libraries |
Group |
2 |
2 |
2 |
Model number and brand of three-axis reducer |
|
IOKO |
IOKO |
IOKO |
X/Y/Z axis power |
Kw |
7.5-7.5-3 |
7.5-7.5-3 |
7.5-7.5-3 |
Three-axis rotation ratio |
|
1:5 |
1:5 |
1:5 |
Connection mode of X-axis motor |
|
Grinding grade rack reducer + direct connection |
||
Connection mode of Y-axis motor |
|
Precision screw reducer + direct connection |
||
Connection mode of Z-axis motor |
|
Precision screw reducer + direct connection |
||
Number of servo drives |
|
X-axis-4-drive X-axis-4-drive Y-axis-1-drive Z-axis-1-drive W-axis-2-drive |
||
Maximum feed speed X-axis |
m/min |
30 |
25 |
20 |
Maximum feed speed Y-axis |
m/min |
35 |
35 |
35 |
Maximum feed speed Z-axis |
m/min |
15 |
15 |
15 |
40Maximum feed speed W-axis |
m/min |
8 |
8 |
8 |
Positioning accuracy |
mm |
±0.01/100 |
±0.015/100 |
±0.018/100 |
Repetitive positioning accuracy |
mm |
0.02 |
0.025 |
0.03 |
Weights System |
|
Nitrogen |
Nitrogen |
Nitrogen |
air pressure |
Mpa |
0.45-0.65 |
0.45-0.65 |
|
Cooling capacity(optional) |
L |
500 |
700 |
800 |
Power capacity |
W |
48 |
48 |
48 |
Power supply incoming in voltage and phase number |
|
380V 3-phase 5-wire |
||
Overall dimension |
|
9260X7500X6900 |
11300X7500X6900 |
13500X7500X6900 |
Machine weight |
Kg |
53000 |
65000 |
71000 |
Chip removal mode |
|
Screw type plus chain row type |
The above image data and photograph are for reference only, and everything is subject to actual productions.